What's up with REPAIRING DATA ARCHIVE?
Greygon
For the 3rd or 4th time in the last week I got the dreaded "REPAIRING DATA ARCHIVE" when I started GW up. It takes it about 20-30 minutes to finish repairing. I ran it earlier today with no problems at all... I have only gotten this 2 or 3 times before this week in the entire time GW has been out.
Is it my computer? Is it GW?
Anyone have any ideas?
Is it my computer? Is it GW?
Anyone have any ideas?
jcapulet
Quote:
Originally Posted by Greygon
For the 3rd or 4th time in the last week I got the dreaded "REPAIRING DATA ARCHIVE" when I started GW up. It takes it about 20-30 minutes to finish repairing. I ran it earlier today with no problems at all... I have only gotten this 2 or 3 times before this week in the entire time GW has been out.
Is it my computer? Is it GW? Anyone have any ideas? |
His GW account hasn't done any "repairs" lately though, so maybe it stops after a while. Anyhow I hope someone here knows what's up with this strange occurence.
Matsumi
One thing about repairing the data archive is usually a sign that something in the original data that was archived has changed, missing, deleted, corrupted, etc. Not that it means all of those things but definately that something has changed and doesn't match what was originally archived. If it's starting to cause problems, such as crashing or other things, I would think about a fresh install. Afterwards, possibly run a complete chkdsk on the drive, along with a defrag. A way you can do this is to open up the "My Computer" icon and right-click your hard drive, go to properties, click the tools tab, check now, and check the options in the window that pops up, then it will check upon restarting the computer. Afterwards you can run a defrag, which can be found the same way, or through accessories.
Pupu
yes its happening to me to lately since nf :/ once or twice a week
tuf pepper
well I'm kinnda glad I am not the only one so thats telling me it is not my computer was wroking fine then went to ember light camp to look at soem skill at the skill trader then bam no lagg no freezing nothing found my self at the log in screen saying err 7 so i try to reconnect but was stuck at it saying connecting so i restarted guildwars and got this "REPAIRING DATA ARCHIVE" window so now I'm just sitting and waiting hoping that nothing gets messed up like a lost char or something lol i will be so pissed if any of them are gone only care about 4 of them 2 are storage and 3 are new chars I havnt done any thing to yet so plz take one of those and not my main 4 if it wont to take any thing away from me lol
(just finished up still got all my chars woot hope this doesnt happen again but next time I wont be so scared lol this was my first "REPAIRING DATA ARCHIVE" run around since i got the game last december)
(just finished up still got all my chars woot hope this doesnt happen again but next time I wont be so scared lol this was my first "REPAIRING DATA ARCHIVE" run around since i got the game last december)
Valveus_of_Loran
I had a thread on this last week, no one posted any solutions. Today I just loaded GW, no repair message! But now, I have an even worse problem. The game loads, my character bar shows up with no skills, just the arrows. No districts, I cant zone. No names appear in the party menu, and the game freezes and unfreezes 5 seconds apart.
Carth`
I had it too... but after Guild Wars had an unrecoverable error (one that causes the program to quit and asks you to send a message to Anet). I've been getting a lot of those crashes after the release of NF. And after a repair I lose all my settings too.
krypt1200
I have repairing data archive all the time. I think it has something to do with the game crashing before, or some file in you folder getting corrupted. Right now, I have these Cubes running around, apparently I lost the necromancer skin, all necros are running around as a "light" box. Not to mention, countless merchants and NPC's do this running jumping sliding thing constantly, they dont stand still, or run normally like they are supposed to. One idea I had was to download a single file defragmenter, defrag it, and it might keep the problems away, any ideas?
Valveus_of_Loran
I did the single file defragmenter, and my GW.dat wasn't even fragmented! The program didnt help me out at all
Greygon
Thanks for all the suggestions. I run a Defrag regularly and my computer is not fragmented very much at all.
I am considering a fresh install. Maybe with the option to d/l all files. It happened to me again last night. Zoned from one area to another and got the Unrecoverable error box. Uuugh...
I am considering a fresh install. Maybe with the option to d/l all files. It happened to me again last night. Zoned from one area to another and got the Unrecoverable error box. Uuugh...
heroajax1
I've had this happen a few times as well. So far, it seems to be nothing more than an annoying graphics corrpution. The most common problem I've had is as people stated, the square white boxes of characters running around. It happened to me once so far in NF. In Kamadan part of the ground graphic got messed up and I had large flat white blocks. It took about 10 minutes to repair and I've been good since. Perhaps running the gw.exe defrag as suggested on earlier threads titled "got lag?" might help this issue. Not sure since I've never done it. I don't get a whole lot of lag. When I do, everyone else is as well.
krypt1200
Ive had the square white boxes for awhile, its only for the necros though, that leads me to believe something has happened and im missing the skin entirely. I need to try that single file defrag. As for the repairing data archive, it hasnt affected those white boxes yet.
ALSO
Anyone else ever run into a problem where NPC's run and jump constantly? Its kind of a foreward run, and then a hop. Cant fix that either.
ALSO
Anyone else ever run into a problem where NPC's run and jump constantly? Its kind of a foreward run, and then a hop. Cant fix that either.
Matsumi
Also, not sure if this may be what's causing all the repairing data archive messages, but I've never gotten one with it turned off.
Zakarr
My last "repairing the data archive" message was in July 2005 when I replaced faulty memory module.
Hardware failure is usually the reason for these messages. If you have overclocked your computer, put back the stock clocks and see if it helps.
Hardware failure is usually the reason for these messages. If you have overclocked your computer, put back the stock clocks and see if it helps.
sindex
Well I indefinitely got one of these this morning and it’s now loading in (first time). For me it might come from the weird fact, that I’ve got some weird error signs every now and then recently (error 007). So you guys are most likely right Defrag and I would say to check for viruses with your ant-virus programs just to be safe. I am crossing my figures and hoping that I don’t lose on of my characters, or I will be ticked off.
Well I guess, I have not lost any yet, thank the great beyond.
Well I guess, I have not lost any yet, thank the great beyond.
Lazarus the Reborn
Alright so I posted a message here before about this "Repairing Data Archive" and I got no help on it. Now it has happend again in the same month! Right now im loading my 5k files to get in the game and will be ready to load my, about 20k files just to get into one character. It seems as if people are having different issues with the repairing data archive, mine seems to be having to redownload every single file known to guildwars. Ive done viruses scans, defragmentation, the usual possibilites-- but nothing has fixed it. Got any solutions?
Masseur
You're lucky, I'm having to repair the data archive several times a week and then next week only once or twice. Also, random NPC's in town, in quests/missions start about 3 strides back from their actual location, run 2 strides and jump to a halt, then slide back to the original spot and repeat, continuously. i have a video of it, it's pretty funny to watch the cut scenes and one of the NPC's like Togo or whatever might be doing that repeatedly while speaking
lightblade
I had it once...after the game crashed. After than, all the NPCs are all weird..they keep playing their "spawn animation", like...jump out of the ground. I had to delete my old GW.dat and install a fresh copy to fix it.
Pupu
i reinstalled 3 times and the bastard still wont work...my necro is stuck in droks cuz everytime i try to go on my necro to load up droks it CRASHES TO DESKTOP WITH THAT DAM BOX....i swear im going nuts...
Matsumi
Quote:
Originally Posted by Pupu
i reinstalled 3 times and the bastard still wont work...my necro is stuck in droks cuz everytime i try to go on my necro to load up droks it CRASHES TO DESKTOP WITH THAT DAM BOX....i swear im going nuts...
|
Pupu
i had the same problem few months back..i changed my ram and it was solved...i just cant believe that now my new ram is possibly the problem?
im guessing i have a dodgy motherboard...but since nf i have seen alot of ppl suffering from the same error...far too many...so im guessing is it my comp..or a game side..
thing is it happend after the last update...other things on my comp work perfectly fine but gw...all my other games play flawless
specs are 2.80ghz pentium4
1gb ddr ram
ati radeon x800gt
intel mobo
40gb hdd (LOL)
ill run memtest overnight tonight and report it tomoz, thx
im guessing i have a dodgy motherboard...but since nf i have seen alot of ppl suffering from the same error...far too many...so im guessing is it my comp..or a game side..
thing is it happend after the last update...other things on my comp work perfectly fine but gw...all my other games play flawless
specs are 2.80ghz pentium4
1gb ddr ram
ati radeon x800gt
intel mobo
40gb hdd (LOL)
ill run memtest overnight tonight and report it tomoz, thx