Budget: $1,100 USD
Making use of combo deals to make it happen.
Case & PSU: http://www.newegg.com/Product/ComboD...t=Combo.178955
CPU & Mobo: http://www.newegg.com/Product/ComboD...t=Combo.181992
RAM: http://www.newegg.com/Product/Produc...82E16820231166
GPU: http://www.newegg.com/Product/Produc...82E16814130398
DVD Burner: http://www.newegg.com/Product/Produc...82E16827151171
Media Card Reader: http://www.newegg.com/Product/Produc...82E16820300608 (Yes, this is necessary, sadly)
Extra 120mm Case Fan: http://www.newegg.com/Product/Produc...82E16811998121 (Blue LED fans always necessary)
CPU Cooler: http://www.xoxide.com/coolit-domino-cpucooler.html
Planning to push the CPU clock as high as the cooler will let me (4GHz reported with similar hardware, hoping for at least 3.5-3.7GHz). Keeping my old hard drive and monitor for now, will upgrade to the standard 640GB WD CB later and pick up a 2209WA whenever I get around to it (shut up I don't need more than 22" you pixel-sluts :3).
Total cost after shipping: $1,094.39 (Budget Goal Met)
Assuming my cost ceiling is $1,100 USD, and not a penny more, does anybody have any suggestions to improve oomph without sacrificing quality (or in the case of the case (hurr that's funny), UNBEATABLE STYLE)? Entirely different configurations of equal or greater ability welcome, because after all, I want MOAR POWAR. And no, I can't wait for the Q4 releases. It's tonight or never, for this one.
Ordering tonight. Any thoughts?
Faer
aga
Not sure if you realise, but your CPU cooler is for watercooled systems.
Unless you are using watercooling this may be more suitable
http://www.newegg.com/Product/Produc...82E16835103053
Apart from that, seems good
Unless you are using watercooling this may be more suitable
http://www.newegg.com/Product/Produc...82E16835103053
Apart from that, seems good
Elder III
I don't think you would need liquid cooling, but if you want to do intensive overclocking then it's not a bad idea.. esp. if you add another GPU later on.
I don't like your Case/PSU combo---- I'm not sold on teh quality of Cooler Master products, and I don't see the need to spend that much money on them. I realize that your case is usually a matter of personal preference, so if you like it go for it.
http://www.newegg.com/Product/Produc...82E16817153039
http://www.newegg.com/Product/Produc...82E16811133062
this is what I would buy... a tad cheaper and imo better quality... good luck with your new system.
I don't like your Case/PSU combo---- I'm not sold on teh quality of Cooler Master products, and I don't see the need to spend that much money on them. I realize that your case is usually a matter of personal preference, so if you like it go for it.
http://www.newegg.com/Product/Produc...82E16817153039
http://www.newegg.com/Product/Produc...82E16811133062
this is what I would buy... a tad cheaper and imo better quality... good luck with your new system.
Faer
Faer
Snograt
So, um, the cable management is a work-in-progress, yes?
Trust you to get a case with a big knob on it - somehow fitting....
Trust you to get a case with a big knob on it - somehow fitting....
Faer
Yeah. It's mostly done, I just didn't tie them all in properly out of sight because I have to pull the panels off again today (or Monday, it seems now - 8AM and UPS still hasn't sent it out for delivery, oh well) to mount the cooler. Just sorta crammed them in place for the night. I'm honestly quite pleasantly surprised how much room there is behind the motherboard tray - I knew there was room before I bought it, I just didn't realize how much room. Getting the PSU cables through the lower management hole was a chore though.
Isn't it beautiful, Snoggy? Big knob and all? :3
Isn't it beautiful, Snoggy? Big knob and all? :3