HW Requirements for Chapter2

Hi,

Anyone have any info about the HW requirements for Chapter 2?

Currently the first chapter runs just fine for me but I don't want to be surprised and find out that my humble laptop just won't cut it with the new chapter.

I have the following HW specs:

ROM = 512M ROM
CPU = 1.8 MHz PentiumIII
64M Display

Network:
about 400k BW depending on the load in our housing complex.

Anyone with more info?

You might want the tech forum for this question
But to give you an answer and this is only an assumption on my part:

If you can play GW now, you should be able to play chapter 2. THere has been no info given stating that they are increasing or changing requirements for the game.

You may want to upgrade. It will boost your performance speed when playing.

hardware req. should be the same i assume.

Sorry for being a bit narrowminded but it is RAM and not ROM because ROM is Read Only Memory.

You have more detailed information about your display adapter for example Radeon 8500, GeForce3, etc.? There is ultra-slow, slow, ok, good and pretty good display adapters with 64 MiB memory.

GW hardware requirements will slowly raise for max quality, but the base quality of what it is (in C2 vs C1) should remain stable for a while to come.

A handy hint, if you have over 1gig of memeory, GW often gets a 10fps boost.