moriz

moriz

??ber t??k-n??sh'??n

Joined
Jan 2006
Location
Canada
Profession
R/

Recent Posts

Jun 27, 2008 at 2:59 PM Overclocking made simple

it might be helpful to turn off "restart at BSOD", or whatever it's called, so we can see the exact error.

Jun 27, 2008 at 1:30 AM no boot after new graphics card

problem fixed. it really is a connection issue. i didn't select the best motherboard. i ended up with a microATX. as such, the board is now...

Jun 27, 2008 at 12:08 AM no boot after new graphics card

my graphics card is here. after i installed it however, the PC does not boot. there was absolutely no reaction when i tried to switch it on. i...

Jun 26, 2008 at 8:35 AM What Graphics card to get?

unfortunately, AGP graphics cards are now almost completely phased out. with nothing to compete against them, the remaining ones tends to be...

Jun 26, 2008 at 8:35 AM What Graphics card to get?

unfortunately, AGP graphics cards are now almost completely phased out. with nothing to compete against them, the remaining ones tends to be...

Jun 25, 2008 at 11:54 PM Help with possible computer purchase

the HD4850 will be enough for GW2 i bet. careful with it though, because it only has two flaws: 1) its longer than i thought. had to rearrange my...

Jun 25, 2008 at 1:15 PM AHHH! Pissed

apparently the HD4870 runs at 84C, at least according to tech report. still on the high end of the spectrum, but definately not that hot. perhaps...

Jun 25, 2008 at 1:12 PM and the GPU plot thickens...

anandtech review of the HD4870: http://www.anandtech.com/video/showdoc.aspx?i=3341&p=1 no mention of the "100C" under load problem....

Jun 25, 2008 at 5:29 AM AHHH! Pissed

rahja and i took a good look at the HD4870 online today.... it's alright, but not completely mindblowing like the HD4850. its performance is...

Jun 24, 2008 at 7:08 PM HD4850 and thermal compound

if i were to remove the stock heat shroud and apply arctic silver 5, do i need to put some on the ram chips as well, since the shroud covers it?

Page 190 of 451